Hydraulic Cone Crusher

Hydraulic Cone Crusher

Hydraulic Cone Crusher

Hydraulic Cone Crusher

Hydraulic Cone Crusher’s introduction:

Hydraulic cone crusher is developed as high-energy cone crusher by introducing German latest technology. The Hydraulic crusher does not only improve production capacity and crushing efficiency, but also expands application scope. As the latest generation product of substituting spring cone crusher and regenerating general hydraulic cone crusher in present mining and construction industry, it is the most ideal equipment for large-sized quarry and crushing of mining industry.

Hydraulic Cone Crusher’s Features:

1. World-level manufacturing technology is adopted, and highest-level raw material is used.

2. Central lubricating device are installed on the machine, so the bearing is easy to be lubricated.

3. Adjustment of the discharge part is more convenient.
The adjustment methods: gasket adjustment, hydraulic assistant adjustment, wedge block and wedge hydraulic adjustment.

4. More advanced movable jaw assembly lengthens life of crusher.
Movable jaw assembly is made from cast piece with high-quality, is driven by two large flying wheels which are made from cast steel. Moreover, heavy eccentric shaft is processed by forged mold. All of these make the JC series jaw crusher extremely reliable.

5. Integral cast steel structure is adopted for bearing seat. Integral cast steel bearing matches well with the crusher frame, at the same time, radial strength of the bearing seat is highly strengthened. However, the separate bearing seat does not have this advantage.

6. Finite element analysis technology is adopted to make the crusher much stronger.

7. Crusher chamber adopts “V” structure which could make actual feed width comply with the nominal one.

8. Bearing with larger model and higher load are used. All JC jaw crusher is equipped with larger bearing compared with same model of normal jaw crusher. Its higher load capacity and effective oil seal will lengthen the life of bearing.

9. A newly designed tooth-shape side plate, makes the available area of jaw plate longer, and enhances the capacity.

10. Pressing bar and support type are used to fix jaw plate.

11. Heavy type protecting plate is intalled for bearing seat, accidental damage of bearing seat is avoided.

12. Supporting bar under jaw plate protects movable jaw and frame from being worn down.

Hydraulic Cone Crusher’s Highlights:

(1) With reasonable structure, advanced crushing principle and technical parameter, reliable operation, low operation cost, high crushing capacity, high production efficiency and high yield etc.

(2) Having convenient and reliable hydraulic system; able to provide safe and efficient overload protection.

(3) Many kinds of crushing cavities applicable to requirements on granularity for large range of products.

(4) Adopting hydraulic control and hydraulically cleaning cavity setting; greatly improving the degree of automation.

(5) Thin oil lubrication, reliable and advanced, improving service life.

Unique thin oil lubrication system design greatly improves the service life of equipments. There is no abrasion for non-contact type and high-performance sealing element, which improves reliability blocking dust and essentially eliminates common failures of original spring cone crusher such as oil water mixing.

(6) There are many kinds of shapes for crushing cavity with flexible application and strong applicability.

Only fixed cone liner and dynamic cone liner must be replaced for HPC cone crusher. The shapes of crushing cavity can be freely changed from standard ultra-large cavity shape to short-head ultra-thin cavity shape, to adapt to requirements of granularity for large range of products.

(7) Simple and convenient maintenance and operation

All parts of HPC cone crusher can be assembled and disassembled and maintained from the top part or the lateral side; the dynamic cone and the fixed cone are conveniently assembled and disassembled without needing to dismantle and assemble the frame and the binding bolt . Therefore, daily replacement of liner is more convenient for HP cone crusher. Use of hydraulic motor makes production efficiency of crusher better.

(8) It can provide higher production capacity and better grain shape of products and can be easily and automatically controlled. It has maximal reliability and flexibility, which can create more value for customers.

Hydraulic Cone Crusher’s Working principle:

The crushing principle of Hydraulic Cone Crusher is finished between fixed cone plate and movable cone plate. The cone crusher’s motor drives the horizontal axis of the cone crusher through triangle belt and pulley, the horizontal axis drive the eccentric shaft bush to rotate through gear transmission. The eccentric shaft drives the main shaft to make the movable cone plate swing at a regulated track from time to time, the materials are crushed due to constant pressed and crooked in the crushing cavity. The finished products are discharged from the discharging opening.

Hydraulic Cone Crusher’s specification:

Type Cavity (coarse/fine) Outlet adjustment range (mm) Feed size (mm) Capacity (t/h) Power (kW) Weight (t) movable cone diameter (mm)
HPC-160 C 12-20 135 100-200 160 13 950
F 5-20 76 55-150
HPC-220 C 15-38 185 150-300 220 18.5 1160
F 6-25 110 70-180
HPC-315 C 19-45 265 190-400 315 26 1400
F 9-30 150 100-200
HPC-400 C 25-50 320 250-500 400 33 1500